Backlight (Backlight); Assigning Folder Names (Folder Name) - Olympus DS-10 Instructions Manual

Backlight
(BACKLIGHT)
The backlight for the recorder will be activated
for approximately 10 seconds each time a
button is pressed. You can select whether or
not you would like to use the backlight.
1 Press the MENU button.
The menu opens ( P.25).
2
Press the FF/+ or REW/– button
until "BACKLIGHT" flashes on the
display.
3 Press the PLAY/SET button.
The backlight setup process begins.
4 Press the FF/+ or REW/– button
to choose between ON and OFF.
ON : Backlight is enabled.
OFF : Backlight is disabled.
5 Press the PLAY/SET button to
complete the setup screen.
6 Press the STOP button to close the
menu.
Assigning Folder
Names
(FOLDER NAME)
You can give each of the five A to E folders a
name with up to 8 characters.
Frequently used words such as "dictation
(DICT.)", "meeting (MEETING)" and "schedule
(SCHEDULE)" are pre-set in a template.
1 Press the MENU button.
The menu opens ( P.25).
2 Press the FF/+ or REW/– button
until "FOLDER NAME" flashes on
the display.
3 Press the PLAY/SET button.
The folder name setup process begins.
4 Press the FF/+ or REW/– button to
choose the folder you want to name.
5 Press the PLAY/SET button to
accept the chosen folder.
6 Press the FF/+ or REW/– button
to choose characters.
The recorder assigns the following buttons
to inputting procedures.
(Available characters P.20)
19