Lcd/Sound Menu [Lcd/Sound]; Setting The Backlight [Backlight]; Adjusting The Contrast [Contrast]; Setting The Led Indicator Light [Led] - Olympus VP-20 User Manual

LCD/Sound menu [LCD/Sound]

Setting the backlight [Backlight]

The display backlights are switched on for
a preset amount of time when a button
operation is performed.
[5 sec.] [10 sec.] [30 sec.] [1 min.]:
Set the amount of time that the
backlight stays lit.
[OFF]:
4
Disables the backlight.

Adjusting the contrast [Contrast]

You can adjust the contrast of the display to
12 different levels.
• The setting can be adjusted to
between [01] to [12].
EN
46
Setting the LED indicator light
[LED]
You can set the unit so that the LED indicator
light does not light. The LED indicator light is
lit or flashing during recording and charging
and while files are being transferred between
the voice recorder and a PC.
[ON]:
LED indicator light is switched on.
[OFF]:
The LED indicator does not light.
• Even if you set the [LED] setting to
[OFF], the LED indicator light will
flash while files are being transferred
between the voice recorder and a PC.
Turning beeping sound ON/OFF
[Beep]
The voice recorder makes beeping sounds
when buttons are pressed, or to warn in case
of operation errors. You can select whether
the voice recorder makes these beeping
sounds.
[ON]:
Enables beeping sounds.
[OFF]:
Disables beeping sounds.