Table of Contents
Advertisement
Network Setup (WPS(PBC))
■
How to set up using WPS(PBC)
If your router has a PBC (WPS) button, follow these steps:
1. Go to
Network Settings
follow the directions of
2. Select the WPS(PBC).
3. Press the
◀
within 2 minutes. Your TV automatically
acquires all the network setting values it
needs and connects to your network.
4. The network test screen appears, and
network setting is done.
screen. To enter it,
Network Settings.
WPS(PBC)
button on your router
Select a network connection type.
Wired
Wireless(General)
WPS(PBC)
One Foot
Connection
● The displayed image may differ depending on the
model.
English
Network Setting
Connect to the Access Point easily by pressing the
WPS(PBC) button. Choose this if your Access Point
supports PUSH button Configuration(PBC).
U Move
E Enter
R Return
▶
Advertisement
Table of Contents
Troubleshooting
