Samsung pl51d550c1m E-Manual page 134

❑ Switching between Anynet+ Devices
1. Press the TOOLS button to select
ENTERE
If you cannot find a device you want, press the
N
2. Select a device and press the
selected device.
The Device List
N
to On
◀
● Switching to the selected device may take up to 2 minutes. You cannot
cancel the operation during the switching operation.
● If you have selected external input mode by pressing the SOURCE button,
you cannot use the Anynet+ function. Make sure to switch to an Anynet+
device by using the
button to select
menu will only appear when you set
in the System menu.
Device
Anynet+ (HDMI-CEC). And then press the
Device List.
ENTERE button. You can switch to the
List.
English
button to refresh the list.
a
Anynet+ (HDMI-CEC)
▶