Table of Contents
Advertisement
How to set up manually
To set up your TV's cable network connection manually, follow these steps:
1. Follow Steps 1 through 2 in the "How to set up automatically" procedure.
2. Select the
3. Set
IP Mode
4. Press the
5. Enter the
◀
the number buttons on your remote to enter numbers and the arrow buttons to
move from one entry field to another.
6. When done, select the OK.
7. The network connection screen appears, and network setting is done.
IP Settings
on network test screen.
to Manual.
button on your remote to go to the IP Address.
d
IP Address, Subnet Mask,
Gateway, and
English
DNS Server
values. Use
▶
Advertisement
Table of Contents
Troubleshooting
