Table of Contents
Advertisement
Problem
I want to start Anynet+.
I want to exit Anynet+.
The message "Connecting to
Anynet+ device..." appears on
◀
the screen.
The Anynet+ device does not
play.
Possible Solution
•
Check if the Anynet+ device is properly connected to the TV and
check if the
Anynet+ (HDMI-CEC)
Setup menu.
•
Press the TOOLS button to display the Anynet+ menu and select a
menu you want.
•
Select
in the Anynet+ menu.
View TV
•
Press the SOURCE button on the TV remote control and select a
non- Anynet+ device.
•
You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
•
Use the remote control when the Anynet+ setting or switching to
view mode is complete.
•
You cannot use the play function when
in progress.
English
is set to
On
in the Anynet+
Plug & Play
(initial setup) is
▶
Advertisement
Table of Contents
Troubleshooting
