Setting up the wireless router in Repeater mode
In the Repeater mode, the wireless router extends your wireless network coverage
and provides you with higher quality wireless radio signal. The NAT, firewall, and IP
sharing services are disabled.
To set up the wireless router in Repeater mode:
1. Choose the Repeater mode.
. Connect your devices.
Chapter : Setting up the hardware
Downloaded from
www.Manualslib.com
RT-N12
RT-N12
Client
Note: We recommend that you use an Ethernet cable (wired connection) to connect your
computer to the wireless router for initial configuration to avoid possible setup problems due to
wireless uncertainty.
manuals search engine
Router
Repeater
Modem
Wireless Router
AP
15
RT-N1
Need help?
Do you have a question about the RT-N12 and is the answer not in the manual?