Windows
1. Go to Control Panel > Network to
. Select TCP/IP Protocol from the
. From the IP Address tab of the
Downloaded from
www.Manualslib.com
NT4.0
®
display the Network setup window
then select the Protocols tab.
Network Protocols list then click
Properties.
Microsoft TCP/IP Properties
window, you can:
•
Select the type of network
adapter installed in your
system.
•
Set the router to assign IP
address automatically.
•
Manually set up the IP address,
subnet mask, and default
gateway.
RT-N12
manuals search engine
Chapter 3: Configuring the clients