Setting Up The Wireless Router In Ap Mode - Asus RT-N12 User Manual

Setting up the wireless router in AP mode

In the AP mode, the wireless router receives the WAN IP address from the router
connected to the WAN port and provides you with wireless radio signal. The NAT,
firewall, and IP sharing services are disabled.
To set up the wireless router in AP mode:
1. Choose the AP mode.
. Connect your devices.
Chapter 3: Configuring the clients
Downloaded from www.Manualslib.com
Note: To set up the wireless router in the AP mode, use Device Discovery included in the
support CD to access the web GUI.
RT-N12
Client
Note: We recommend that you use an Ethernet cable (wired connection) to connect your
computer to the wireless router for initial configuration to avoid possible setup problems due to
wireless uncertainty.
manuals search engine
Router
Repeater
Modem
RT-N12
Router
AP
17
RT-N12