Setting Up The Wireless Router In Repeater Mode - Asus RT-N10E EZ N User Manual

Setting up the wireless router in Repeater mode

In the Repeater mode, the wireless router extends your wireless network coverage
and provides you with higher quality wireless radio signals. The NAT, firewall, and
IP sharing services are disabled.
To set up the wireless router in Repeater mode:
1. Connect your devices.
Client
Note: We recommend that you use an Ethernet cable (wired connection) to connect your
computer to the wireless router for initial configuration to avoid possible setup problems due to
wireless uncertainty.
. Launch your web browser and the QIS web page appears automatically. Select
Repeater mode, then click Save.
Note: If the QIS web page does not appear after you launched your web browser, disable the
proxy settings on your web browser.
3. Select the AP whose wireless signal you want to extend, then click Connect.
14
RT-N10E
RT-N10E
Wireless Router
Modem
Chapter : Setting up the hardware