Setting up the wireless router in Router mode
In the Router mode, the wireless router connects to the Internet via PPPoE,
Automatic IP, PPTP, LTP, or Static IP, and provides you with wireless radio signal.
The NAT, firewall, and IP sharing services for LAN clients are enabled.
To set up the wireless router in Router mode:
1. Choose the Router mode.
. Connect your devices.
1
Downloaded from
www.Manualslib.com
RT-N12
Client
Note: We recommend that you use an Ethernet cable (wired connection) to connect your
computer to the wireless router for initial configuration to avoid possible setup problems due to
wireless uncertainty.
RT-N1
manuals search engine
Router
Repeater
RT-N12
Chapter : Setting up the hardware
AP
Modem
Need help?
Do you have a question about the RT-N12 and is the answer not in the manual?