Setting up the wireless router in Repeater mode
In the Repeater mode, the wireless router extends your wireless network coverage
and provides you with higher quality wireless radio signals. The NAT, firewall, and
IP sharing services are disabled.
To set up the wireless router in Repeater mode:
1. Choose the Repeater mode.
. Connect your devices.
Client
Note: We recommend that you use an Ethernet cable (wired connection) to connect your
computer to the wireless router for initial configuration to avoid possible setup problems due to
wireless uncertainty.
Chapter : Setting up the hardware
ROUTER
AP
REPEATER
RT-N12 C1
RT-N12 C1
AP
ROUTER
REPEATER
Wireless Router
Router
Repeater
Modem
AP
RT-N1 C1
15