(Ref.No.) Description
(8)
RESET button
(9)
HISS button
(10)
Immobilizer system
(HISS) indicator
(red)
14
Classic Cycles Technical Resources
This button is used to reset the tripmeter or to select
the tripmeter or odometer or to adjust the time.
This button is used to cancel flashing the immobilizer
system (HISS) indicator when the ignition switch is
OFF (page
52
).
This indicator lights for a few seconds when the
ignition switch is turned ON and the engine stop
switch is at
properly-coded key has been inserted. If an
improperly-coded key has been inserted, the
indicator will remain on and the engine will not start
(page
51
).
Function
(RUN). It will then go off if the