Progress Of Programme; Loading Door Lock - Beko WR 852421S User Manual

Table of Contents

To deactivate the Child Lock:

Press and hold 1

is running. The lights on the 1

"C02", "C01" will appear on the display respectively while you keep the buttons pressed

for 3 seconds. Then, "COFF" will appear on the display indicating that the Child Lock is

deactivated.

In addition to the method above, to deactivate the Child Lock, switch the Programme

Selection knob to On / Off position when no programme is running, and select another

programme.

Child Lock is not deactivated after power failures or when the machine is unplugged.

4.6.11 Progress of programme

Progress of a running programme can be followed from the Programme Follow-up

indicator. At the beginning of every programme step, the relevant indicator light will turn

on and light of the completed step will turn off.

You can change the auxiliary functions, speed and temperature settings without stopping

the programme flow while the programme is running. To do this, the change you are

going to make must be in a step after the running programme step. If the change is not

compatible, relevant lights will flash for 3 times.

If the machine does not pass to the spinning step, Rinse Hold function might be active or

the automatic unbalanced load detection system might be activated due to the unbalanced

distribution of the laundry in the machine.

There is a locking system on the loading door of the machine that prevents opening of the

door in cases when the water level is unsuitable.

Loading door light will start flashing when the machine is switched to Pause mode.

Machine checks the level of the water inside. If the level is suitable, Loading Door light

illuminates steadily within 1-2 minutes and the loading door can be opened.

If the level is unsuitable, Loading Door light turns off and the loading door cannot be

opened. If you are obliged to open the Loading Door while the Loading Door light is off, you

have to cancel the current programme; see "Cancelling the programme".

31 / EN

and 2

auxiliary function buttons for 3 seconds while any programme

and 2

Auxiliary Function buttons will flash, and "C03",

Washing Machine / User's Manual

Table of Contents