Figure 6: Abr Configuration Example - Avaya 8600 Engineering

To configure a Ethernet Routing Switch 8600 as an ASBR, use the following command
PP8600A# config ip ospf as-boundary-router enable
8.2.1.3 Configuration Example - Configuring the ABR
On the Ethernet Routing Switch 8600, there are no configuration steps to enable a Ethernet Routing
Switch 8600 for ABR. As soon as more than one area is configured, the Ethernet Routing Switch 8600 is
automatically configured as an OSPF ABR. The following is an example on how to add an OSPF
interface to a new area:
In reference to PP8600B, the following commands are used to configure it for area 0.0.0.2 and area
0.0.0.0 thereby making it an OSPF ABR.
PP8600B Configuration Steps
Step 1 Configure OSPF Interface
config ethernet 2/6 ip create 10.1.1.17/30
2090
config ethernet 2/6 ip ospf enable
Step 2 Configure Second OSPF Interface
config ethernet 2/1 ip create 10.1.1.22/30
2090
config ethernet 2/1 ip ospf enable
Step 3 Create Circuitless IP
config ip circuitless-ip-int
1.1.1.2/255.255.255.255
config ip circuitless-ip-int
enable
November 2010

Figure 6: ABR Configuration Example

1 create
1 ospf
ERS 8600 / 8800 OSPF Technical Configuration Guide
These two command configure port 2/6 as a brouter port
and enables OSPF on this interface
These two command configure port 2/1 as a brouter port
and enables OSPF on this interface
These commands create a circuitless IP address which
will be used for the OSPF Router-ID
avaya.com
21