Basic Operation Of Image Express Utility 2.0 - NEC PA600X User Manual

Basic Operation of Image Express Utility 2.0

This section explains the following three cases as examples of operating Image Express Utility 2.0.
(1) Transferring images to the projector
(2) Holding a conference
(3) Participating in a conference
Sending Images to Projector
• Connecting projector
1 Turn on the power to the projector for which LAN has been set.
2 Click Windows [Start] → [All Programs] → [NEC Projector User Supportware] → [Image Express Utility 2.0]
→ [Image Express Utility 2.0 ], in that order.
The "Selection Of Network Connections" window will be displayed.
A list of the network equipment connected to your computer will be displayed.
IMPORTANT:
A screen like the one below is displayed when the software is started on a PC installed with Windows XP Service Pack 2 (SP2) (or
later).
Click "Unblock" if this is displayed.
3 Select the network equipment that is to be used and click [OK].
Select the network device displaying "Easy Connection" if the product LAN setting is for "Easy Connection." This
will call up the "Projector List" window.
Downloaded From projector-manual.com NEC Manuals
176
8. User Supportware