Installation And Connections; Making Connections; Analog Rgb Signal Connection - NEC PA600X User Manual

 Making Connections

The projector can be connected to a computer using the computer cable (included), a BNC cable (5-core type)
(commercially available), HDMI cable (commercially available) or DisplayPort cable (commercially available).

Analog RGB signal connection

• Connect the included computer cable between the computer's display output connector (mini D-Sub 15-pin) and
the projector's Computer 1 or Computer 2 video input connector.
• When connecting the computer's display output connector (mini D-Sub 15-pin) and the projector's Computer 3
video input connector, use a BNC cable (5-core) → mini D-Sub 15-pin converter cable.
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
COMPUTER 1 IN
COMPUTER 2 IN
COMPUTER 3 IN
Downloaded From projector-manual.com NEC Manuals
RGB - to - BNC cable
(not supplied)
Stereo mini-plug
audio cable (not
supplied)
Computer cable (VGA) (supplied)
To mini D-Sub 15-pin connector on the
projector. It is recommended that you use a
commercially available distribution amplifier
if connecting a signal cable longer than the
cable supplied.
SOURCE button on the projector
cabinet
COMPUTER 1
COMPUTER 2
COMPUTER 3

6. Installation and Connections

Stereo mini-plug
audio cable (not
supplied)
NOTE: For Macintosh, use a commercially avail-
able pin adapter (not supplied) to connect to
your Mac's video port.
Button on the remote control
COMPUTER 1
COMPUTER 2
COMPUTER 3
143