Basic Operation of Image Express Utility 2.0
This section explains the following three cases as examples of operating Image Express Utility 2.0.
(1) Transferring images to the projector
(2) Holding a conference
(3) Participating in a conference
Sending Images to Projector
• Connecting projector
1 Turn on the power to the projector for which LAN has been set.
2 Click Windows [Start] → [All Programs] → [NEC Projector User Supportware] → [Image Express Utility 2.0]
→ [Image Express Utility 2.0 ], in that order.
The "Selection Of Network Connections" window will be displayed.
A list of the network equipment connected to your computer will be displayed.
IMPORTANT:
A screen like the one below is displayed when the software is started on a PC installed with Windows XP Service Pack 2 (SP2) (or
later).
Click "Unblock" if this is displayed.
3 Select the network equipment that is to be used and click [OK].
Select the network device displaying "Easy Connection" if the product LAN setting is for "Easy Connection." This
will call up the "Projector List" window.
176
8. User Supportware