Connecting The Projector To The Media Server - NEC PA600X User Manual

Connecting the projector to the media server

Press the VIEWER button on the remote control.
The VIEWER will start.
• Another way to start the VIEWER is to press the SOURCE button a few times on the projector cabinet. (→ page
16)
• This will start searching for a computer with "media sharing" enabled in the network and add it to the "Media server"
of the thumbnail screen.
Another way to do this is to point the cursor to "Media server" and select [REFRESH] from the thumbnail menu
and press the ENTER button.
NOTE:
• Up to four accessible media servers can be automatically searched and displayed. The fifth device or later cannot be displayed.
(→ page 60)
Downloaded From projector-manual.com NEC Manuals
79
4. Using the Viewer