Connecting Hdmi Input - NEC PA600X User Manual

Connecting HDMI Input

You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook type PC to the
HDMI IN connector of your projector.
NOTE: The HDMI IN connector supports Plug & Play (DDC2B).
Input connector
HDMI IN
TIP: For users of audio video equipment with an HDMI connector:
Select "Enhanced" rather than "Normal" if HDMI output is switchable between "Enhanced" and "Normal".
This will provide improved image contrast and more detailed dark areas.
For more information on settings, refer to the instruction manual of the audio video equipment to be connected.
• When connecting the HDMI IN connector of the projector to the DVD player, the projector's video level can be
made settings in accordance with the DVD player's video level. In the menu select [HDMI SETTINGS] → [VIDEO
LEVEL] and make necessary settings.
If the HDMI input sound cannot be heard, in the menu select [AUDIO SELECT] → [HDMI].
•
If the HDMI input's sound is not output, check that [OPTIONS(1)] → [DIGITAL AUDIO SELECT] → [HDMI] on the
•
projector's on-screen menu is set to "HDMI". (→ page 109)
Downloaded From projector-manual.com NEC Manuals
HDMI cable (not supplied)
Use High Speed HDMI
®
Cable.
SOURCE button on the projector
cabinet
Audio cable (not supplied)
Button on the remote control
HDMI
149
6. Installation and Connections
HDMI