Exploded Views 3 - Hitachi DV-PF2U Service Manual

STEP START-
/LOC. ING
No. No.
[33] [2],[25] M Brake T Assembly
[34] [2],[25] M Brake S Assembly
Tension Lever Sub
[35] [34]
Assembly
[36] [35] T Lever Holder
[37] [33] M Gear
[38] [2],[15] Sensor Gear
[39] [33] Reel T
[40] [35] Reel S
Moving Guide S
[41] [31],[35]
Preparation
Moving Guide T
[42] [32]
Preparation
[43] [19] TG Post Assembly
[44] [19],[28] Rack Assembly
[45] [44] F Door Opener
*[46] [46] Cleaner Lever Assembly
*[47] [46] CL Post
↓ ↓
(1) (2)
(1): Follow steps in sequence. When reassembling, follow the steps in reverse order.
These numbers are also used as ldentification (location) No. of parts in the figures.
(2): Indicates the part to start disassembling with in order to disassemble the part in column (1).
(3): Name of the part
(4): Location of the part: T=Top B=Bottom R=Right L=Left
(5): Figure Number
(6): Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered.
P=Spring, W=Washer, C=Cut Washer, S=Screw, *=Unhook, Unlock, Release, Unplug, or Desolder
e.g., 2(L-2) = two Locking Tabs (L-2).
(7): Adjustment Information for Installation
(+):Refer to Deck Exploded Views for lubrication.
* In case of some models, the Cleaner Lever Assembly is not used.
PART
Fig. No.
T DM1,DM16 *(P-6)
T DM1,DM16 *(P-7)
T DM1,DM16
T DM1,DM16 *(L-6)
T DM1,DM16 (C-6)
T DM1,DM16 (C-7)
T DM1,DM16
T DM1,DM16
T DM1,DM17
T DM1,DM17
T DM1,DM17 *(L-7)
R DM18
R DM18
T DM1,DM6
T DM6
↓ ↓
(3) (4)
REMOVAL
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
*(L-8)
*(L-9)
↓ ↓
(5) (6)
.
INSTALLATION
ADJUSTMENT
CONDITION
(+)Refer to Alignment
Sec.Pg.2-3-2
Type A
Type B
Type A
↓
(7)
2-2-2