Hitachi DV-PF2U Service Manual page 31

[12] Deck Pedestal-1
[13] Deck Pedestal-2
(S-12)
(S-13)
[14] Side
Bracket
HOW TO MANUAL EJECT
1. Remove the Top Case.
2. Make a tool from a paper clip, etc., (length = approxi-
mately 50 mm, maximum diameter = approximately 3
mm) as shown below.
3. Insert the tool into the manual eject hole on the DVD
Mecha. Then, push it until the tray is ejected.
Top Cover
1
DVD Mecha
Tray
4
(S-11)
Fig. D9
Eject Hole
3
Deck Assembly
Paper clip (Available Locally)
2
Straightened
portion = approximately 35mm
Length = approximately 50mm
2-1-5