Olympus Stylus 1050SW Instruction Manual page 48

Operating the camera by tapping the body [TAP CONTROL]
x SETUP
TAP CONTROL
Submenu 2
OFF Cancels [TAP CONTROL]
ON [TAP CONTROL] is activated.
Adjusts the tap strength and intervals between multiple taps on each side of the camera
CALIBRATE
body. (top, left, right, & back)
Functions available when [TAP CONTROL] is set to [ON]
Camera's left side [LEFT]:
Sets [SHADOW ADJ.].
Camera's back [BACK]: Tap once
Switches to playback mode.
Operating during shooting mode (Example: Flash mode)
1 Tap the right side of the camera body once.
●
The fl ash mode selection screen is displayed.
2 Tap the right or left side of the camera body to select a
function.
3 Tap the top of the camera body twice to confi rm your
selection.
Tap the camera fi rmly using the pad of your fi nger.
When the camera is stabilized on a tripod for example, tap control
may not work properly.
To prevent dropping the camera when using tap control, strap the
camera to your wrist.
48 EN
Camera's top [TOP]: Tap twice
●
Confi rms the selected menu.
●
Switches [TAP CONTROL] to [ON] or [OFF]. (p. 4)
Tap once
(p. 20)
(p. 49)
Application
Camera's right side [RIGHT]: Tap once
Sets the fl ash mode.
P
AUTO
When tapping the camera's top
(p. 21)
/ /
SET SET OK OK
FLASH AUTO FLASH AUTO
! $
AUTO #