Olympus Stylus 1050SW Instruction Manual page 29

Olympus digital camera owner's manual
Hide thumbs Also See for Stylus 1050SW:
Table of Contents

Advertisement

Make the settings for the functions while referring to "Using the Menu" (p. 3).
Adjusting to a natural color scheme
[WB]
K CAMERA MENU
Submenu 2
The camera automatically adjusts
AUTO
the white balance according to the
shooting scene.
5
For shooting outdoors under a
clear sky
3
For shooting outdoors under a
cloudy sky
1
For shooting under tungsten
lighting
w
For shooting under daylight
fl uorescent lighting (household
lighting, etc.)
x
For shooting under neutral
fl uorescent lighting (desk lamps,
etc.)
y
For shooting under white
fl uorescent lighting (offi ces, etc.)
Selecting the ISO sensitivity [ISO]
K CAMERA MENU
In the ISO setting, although smaller values
result in less sensitivity, sharp images can
be taken under fully lit conditions. Larger
values result in higher sensitivity, and
images can be taken at fast shutter speeds
even under dimly lit conditions.
High sensitivity introduces electrostatic
noise into the resulting picture, which may
give it a grainy appearance.
Submenu 2
The camera automatically adjusts
AUTO
the sensitivity according to the
shooting scene.
80/100/200/400/
The ISO (sensitivity) setting is
800/1600
fi xed by manually selecting it.
WB
: K h s A
Application
ISO
: K
Application
Shooting pictures sequentially while
the shutter button is held down
[DRIVE]
K CAMERA MENU
Submenu 2
One frame is shot each time the
o
shutter button is pressed.
Sequential shooting at the focus,
brightness (exposure), and white
j
*1
balance that is locked in the fi rst
frame.
Sequential shooting at a higher
i
speed than [j].
The shooting speed varies depending on the
*1
settings for [D IMAGE QUALITY] (p. 28).
"Saving only selected images
from sequentially shot images
([SHOOT & SELECT 1]/
[SHOOT & SELECT 2] mode)" (p. 32)
When set to [ j ], [R] (Still picture REC)
(P. 31) is not available.
When set to [i], fl ash is set fi xed [$]
(FLASH OFF) and [ISO] is fi xed to [AUTO].
When set to [i], [IMAGE SIZE] is limited
to [I] or lower. Moreover, [FINE ZOOM]
(p. 30), [DIGITAL ZOOM] (p. 30), and [R]
(Still picture REC) (p. 31) are not available.
DRIVE
: K h s
Application
EN
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M 1050 sw

Table of Contents