Olympus Stylus 1050SW Instruction Manual page 32

Saving only selected images
from sequentially shot images
([SHOOT & SELECT 1]/
[SHOOT & SELECT 2] mode)
1 Select [e SHOOT & SELECT 1] or [f
SHOOT & SELECT 2]. Hold down the
shutter button to take sequential shots.
Icon for selected
mode
Selected
thumbnail image
Thumbnails of
sequentially
shot images
2 Use the 34 to select the image to be
erased, and then press the o button.
R mark is added
to the thumbnail.
3 Repeat Step 2 to select the images to be
erased, and then press the D button to
erase the selected images.
Detecting a smiling face to release the
shutter automatically
([lSMILE SHOT] mode)
1 Select [lSMILE SHOT], and then aim
the camera towards the subject.
●
The self-timer lamp turns on. When a smiling
face is detected, the camera automatically
takes 3 sequential shots.
Pictures can also be taken manually by
pressing the shutter button.
The camera may not be able to detect a
smiling face for some subjects.
32 EN
BACK GO
OK
MENU
Select and erase screen
GO
OK
Capturing the perfect moment when
shooting ([YPRE-CAPTURE MOVIE]
mode)
1 Use 12 to select [YPRE-CAPTURE
MOVIE], and then press the o button to
set.
●
This function is ready for shooting
immediately after setting this option.
2 Press the shutter button to start movie
shooting.
●
A 7-second movie, including 2-second movie
immediately before pressing the shutter
button, is taken.
●
The optical zoom and auto focus function are
available during movie recording.
D
Sound is not recorded.
AF target mark does not appear on the
monitor.
Select [IMAGE SIZE] from [VGA] or [QVGA],
and select [FRAME RATE] from [N 30fps]
or [O 15fps].
Tapping the camera to shoot a picture
D
([aSNOW] mode)
1 Select [aSNOW], and then press the o
button.
●
[TAP CONTROL] (p. 48) automatically
becomes active and the camera can be
operated by tapping.
2 Tap the back of the camera body twice.
●
[SELFTIMER] becomes active and the picture
is automatically taken after 2 seconds.