Make the settings for the functions while referring to "Using the Menu" (p. 3).
Selecting the camera sound and its volume [SOUND SETTINGS]
x SETUP
SOUND SETTINGS
Submenu 2
SOUND TYPE
BEEP
VOLUME
SOUND TYPE
SHUTTER SOUND
VOLUME
OFF (No sound)/
8
LOW/HIGH
OFF (No sound)/
q VOLUME
LOW/HIGH
To turn off all sounds at once, make the setting from [j SILENT MODE] (p. 49).
Viewing the image immediately after shooting [REC VIEW]
x SETUP
REC VIEW
Submenu 2
The image being recorded is not displayed. This allows the user to prepare for the next
OFF
shot while following the subject in the monitor after shooting.
The image being recorded is displayed. This allows the user to make a brief check of the
ON
image that was just taken.
Even when set to [ON], you can resume shooting while the image is being displayed.
Submenu 3
Submenu 4
1/2
OFF (No sound)/
LOW/HIGH
1/2/3
OFF (No sound)/
LOW/HIGH
Selects the operating sound and volume
of the camera buttons (except the shutter
button).
Selects the operating sound and volume of
the shutter button.
—
Adjusts the warning sound volume.
—
Adjusts the image playback volume.
Application
Application
EN
43