Table of Contents
Advertisement
Replacing the Lamp (continued)
Resetting Lamp Time
After installing a new lamp (lamp unit), reset the lamp time. The lamp time counter will be reset and a new count will
start.
● If the accumulated lamp time has reached 2000 hours, this unit will not work (lamp does not light up) unless the lamp time is
reset.
OPERATE
ON
CHP
LIGHT
MENU
ENTER
PRESET
T
ZOOM
W
38
Downloaded from ProjectorsManual.com Manuals
a
Insert plug into the power outlet
OFF
● The main power turns on and the [STAND BY] indicator on the unit lights
TEST
EXIT
EXIT
ENTER
b
Press the [EXIT], [ENTER] and [HIDE] buttons
sequentially, then press the [K] button for 2
seconds or more
HIDE
HIDE
● The [STAND BY] and [OPERATE] indicators will alternately blink for a
K
FOCUS
ENTER
Caution During Reset Work
Reset the lamp time only when you have replaced the lamp.
Never reset it when the lamp is still in use.
Otherwise, the approximate standard for gauging replacement time may be
inaccurate, lamp performance may deteriorate and lamp blowout may
occur.
up.
duration of about 3 seconds each. After blinking stops, lamp time resets
and the unit returns to the standby mode ([STAND BY] indicator lights
up).
EXIT
Press as per normal
HIDE
Press for 2 seconds or more
To ensure the lamp time has been reset
The lamp time can be checked via the ALamp TimeB item of the
AInformationB menu. (A Pages 28, 32)
Advertisement
Table of Contents
