Replacing the Lamp (continued)
Procedure for Lamp Replacement
a
Remove the control panel cover
● Please refer to page 12 for details on removing the
control panel cover.
b
Loosen the screws and remove the
lamp cover
● Loosen the 1 screws with a F screwdriver.
c
Loosen the screws on the lamp unit
and lift up the handle
● Loosen the 2 screws with a F screwdriver.
d
Pull out the lamp unit
36
Downloaded from ProjectorsManual.com Manuals
Control Panel Cover
Lamp Cover
Handle
Lamp Unit