Table of Contents
Advertisement
Adjusting the zoom
Adjusting the zoom with the power
zoom lever
Press the zoom lever C slightly to zoom
slowly, and press it further to zoom more
quickly.
z Tips
• When focusing, the minimum distance required
between the camcorder and the subject is about
1 cm (about 13/32 in.) for wide angle and about
1 meter (about 39 3/8 in.) for telephoto.
• The focus may not be adjusted at certain zoom
positions if the subject is within 1 meter (about
39 3/8 in.) from your camcorder.
• Keep your finger on the power zoom lever C.
If you move your finger off the power zoom
lever C, the operation sound of the power
zoom lever may also be recorded.
• You can select the type of zoom operation for
the zoom lever ([ZOOM TYPE], page 100).
Adjusting the zoom with the handle
zoom
Press the handle zoom lever A to zoom in
or out.
z Tip
• You can turn the handle zoom function on/off,
and change the zoom operation speed
([HANDLE ZOOM], page 100).
Adjusting the zoom with the zoom
ring
You can zoom at the desired speed by
turning the zoom ring B. Fine adjustment
is also possible.
b Note
• Turn the zoom ring B at a moderate speed. If
you turn it too fast, the zoom may lag behind the
zoom ring rotation, or the operation sound of the
zoom may also be recorded.
33
Advertisement
Table of Contents
