Table of Contents
Advertisement
z Tips
• For details about changing the screen display during recording, see page 68.
• For details about screen display during recording, see page 17.
• The recording lamps can be set to stay off ([REC LAMP], p. 113).
Continuous recording on the memory cards (Relay Rec)
Insert memory cards each in both slots A and B so the camcorder switches memory card A (or
B) just before the remaining space on the other one runs out, and continues recording on the
next memory card automatically.
Do the following setting before recording.
Press MENU t select
[RELAY REC] with the V/v/B/b/SET button.
Exchange the recordable memory card
Small space
REC start
b Notes
• Do not eject the memory card that is currently being used for recording. When replacing a memory card
while recording, replace only the one in the slot whose access lamp is off.
• Even if you press the SLOT SEL button, while recording movies, you cannot switch the slot currently
being used.
• When the remaining recording time of the memory card being used is less than 1 minute and the other slot
has a recordable memory card inserted, [
The indicator turns off when the memory card is switched.
• If you start recording on a memory card with the remaining recording time of less than 1 minute, the
camcorder may not be able to relay-record. To relay-record without failing, make sure that the memory
card has more than 1 minute when you start recording.
• Seamless playback of relay-recorded movies with this camcorder is not possible.
• You can combine relay-recorded movies using application software (p. 20).
• The maximum recording time using relay recording is 6 hours for XAVC/MPEG HD and 13 hours for
AVCHD. Recording stops automatically when the maximum recording time elapses.
(REC/OUT SET) t [REC SET] t [SIMUL/RELAY REC] t
REC end
Small space
] or [
REC: Recording
] appears on the camcorder screen.
31
Continued ,
Advertisement
Table of Contents
