Selecting A Network; Making A Call - Tait T3040II Operator's Manual

Trunked handportable radio

Table of Contents

This section describes the operations you can perform in

Trunking mode. Note that there are two sets of confidence

tones available during preprogramming; the MPT set and

the Tait set. This manual describes only the Tait set, which

is the default.

Selecting a Network

Your radio may be preprogrammed with the ability to operate

on up to four networks, one at a time.

To display the name of the network currently in use and the

identity details of your radio, dial -700, then Enter (3).

Use the menu to change networks (see "Using the Menu").

Enter the number of the required party using the numeric key-

pad or by selecting a labelled preset number (see "Dialling,"

below).

After entering the number, press the Enter (3) or Hash (6)

keys to make the call. You will hear call setup tones, and the

WAIT message may be displayed.

Table of Contents