Erasing Pictures; Zoom Lever - Olympus FE-350 Wide Instruction Manual

Y# button
a
Press Y# in shooting mode to select the flash mode.
Press  to set.
AUTO Flash auto
!
Red-eye reduction
flash
#
Fill-in flash
$
Flash off
m button
b
Displays the top menu.
/S button
c
 Increasing the brightness of the monitor (Backlight boost)
The monitor lights brighter when  is pressed in shooting mode. If there is no operation for
10 seconds, it dims back to the original brightness.
• When [BRIGHT] is selected in [s], the monitor brightness does not change.
S Erasing pictures
In playback mode, select the picture you want to erase, and press S.
• Once erased, pictures cannot be restored. Check each picture before erasing to avoid
accidentally erasing pictures you want to keep.
g "0 Protecting pictures" (P. 25)

Zoom lever

d
Shooting mode: Zooming in on your subject
Optical zoom: 4×
Digital zoom: 4× (optical zoom × digital zoom: Max. 16×)
Zoom out:
Turn the zoom
lever to the W-
side.
16
EN
The flash fires automatically in low light or backlight conditions.
This emits pre-flashes for red-eye reduction.
The flash fires regardless of the available light.
The flash does not fire.
Increasing the brightness of the monitor (Backlight boost)/
P
8 8
M M
W W T T
4 4
N N
ORM ORM IN
Zoom bar
The zoom bar appears white when the current zoom position is within
the optical zoom area. When the digital zoom activates, the zoom bar
appears yellow and the image is further enlarged.
Displaying the top menu
Zooming while shooting/Close-up playback
P
8 8
M M
W W T T
N N
ORM ORM
Flash shooting

Erasing pictures

Zoom in:
Turn the zoom
lever to the T-
side.
4 4
IN