Other Functions; Using An Aux Source; Switching The Display Indication - Pioneer MVH-8250BT Operation Manual

Section
03 Operating this unit

Other Functions

Using an AUX source

When connecting auxiliary device using the
front AUX input
! You need to activate the AUX setting in the
initial setting menu. Refer to AUX Input
(auxiliary input) on page 27.
! If an iPod with video capabilities is con-
nected to this unit via 3.5mm plug (4 pole)
cable (such as the CD-V150M), you can
enjoy the video contents of the connected
iPod.
! A portable audio/video player can be con-
nected by using a 3.5mm plug (4 pole) with
an RCA cable (sold separately). However,
depending on the cable, a reverse connec-
tion between the red (right side audio)
cable and yellow (video) cable may be re-
quired in order for the sound and video
image to be reproduced correctly.
% Insert the mini plug into the AUX input
jack on this unit.
For more details, refer to Head unit on page 7.
This auxiliary device is automatically set to
AUX.
Function settings
1 Press M.C. to display the function
menu.
2 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
A/V Change (auxiliary device signal setting)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
! Audio – auxiliary device connected with a
stereo mini plug cable
! Video – auxiliary video device connected with
4-pole mini plug cable (e.g., CD-V150M)
3 Press M.C. to confirm the selection.
Display (display setting)
! Refer to Display (display setting) on page 15.
Downloaded from Caradio-Manual.com Manuals
32
En
Wide Mode (switching the wide mode)
! Refer to Wide Mode (switching the wide mode)
on page 15.
Notes
! Operation is complete even if the menu is can-
celled before being confirmed.
! You can select the following functions if the
background setting on the entertainment
menu is off.
— Wide Mode (switching the wide mode)
— Display (display setting)
! You can select Display and Wide Mode,
when Video has been selected.

Switching the display indication

Display indication can be switched on or off.
% Press and hold
# Pressing one of the buttons will turn on dis-
play indication.
.