Olympus FE-170/X-760 Advanced Manual page 57

Monitor indication
CARD SETUP
POWER OFF
FORMAT
SET OK
MEMORY SETUP
POWER OFF
MEMORY FORMAT
SET OK
NO CONNECTION
NO PAPER
NO INK
JAMMED
SETTINGS
CHANGED
PRINT ERROR
r
CANNOT PRINT
Possible cause
This card cannot be used
in this camera. Or, the
card is not formatted.
There is an error in the
internal memory.
The camera is not
connected to the printer
correctly.
There is no paper in the
printer.
The printer has run out of
ink.
The paper is jammed.
The printer's paper tray
has been removed or the
printer has been operated
while changing settings on
the camera.
There is a problem with
the printer and/or camera.
Pictures recorded on
other cameras may not be
printed on this camera.
Corrective action
Format the card or replace.
• Select [POWER OFF] and press i
and then insert a new card.
• Select [FORMAT]
press i. The card is formatted. All
data on the card is erased during
formatting.
Select [MEMORY FORMAT]
and press i. The internal memory is
formatted. All data in the internal
memory is erased.
Connect the camera and printer
correctly.
Load some paper in the printer.
Replace the ink cartridge in the printer.
Remove the jammed paper.
Do not operate the printer while
changing settings on the camera.
Turn off the camera and printer. Check
the printer and remedy any problems
before turning the power on again.
Use a computer to print the pictures.
[YES] and
[YES]
57
EN