Olympus FE-170/X-760 Advanced Manual page 39

Note
• Mac versions earlier than OS X 10.2 are not supported.
• Operation is only guaranteed on a Macintosh equipped with a built-in USB port.
• QuickTime 6 or later and Safari 1.0 or later must be installed.
• Be sure to remove the media (drag & drop onto the trash icon) before performing the
following operations. Failure to do so could result in unstable computer operation and
the need to reboot.
• Disconnect the cable connecting the camera to the computer
• Turn off the camera
• Open the camera's battery compartment/card cover
Windows
1
Insert the CD-ROM into the CD-ROM
drive.
• The OLYMPUS Master setup screen is
displayed.
• If the screen is not displayed, double-click the
"My Computer" icon and click the CD-ROM
icon.
2
Click "OLYMPUS Master".
• The QuickTime installation screen is displayed.
• QuickTime is required to use OLYMPUS
Master. If the QuickTime screen is not
displayed, QuickTime 6 or later is already
installed on the computer. In this case, go to
step 4.
3
Click "Next" and follow the on-screen
instructions.
• When the QuickTime licensing agreement is
displayed, read the agreement and click
"Agree" to proceed with the installation.
• The OLYMPUS Master installation screen is
displayed.
39
EN