Olympus FE-170/X-760 Advanced Manual page 25

BACKUP
.................................... Copying pictures in the internal memory to the card
Insert the optional card into the camera. Copying data does not erase the pictures in
the internal memory.
• It takes some time back up data. Make sure that the battery has enough power
before starting the operation. Or, use the AC adapter.
W
................................................................................... Selecting a display language
You can select a language for on-screen display. Available languages vary depending
on the area where you purchased this camera.
You can add other languages to your camera with the provided OLYMPUS Master
software.
PIXEL MAPPING
The pixel mapping feature allows the camera to check and adjust the CCD and image
processing functions. It is not necessary to operate this function frequently.
Approximately once a year is recommended. Wait at least one minute after taking or
viewing pictures to allow the pixel mapping function to perform properly. If you turn the
camera off during pixel mapping, start again.
Select [PIXEL MAPPING] and when [START] is displayed, press i.
K/q
....................................................................... Turning on the power with K/q
You can turn on the power by pressing either K or q.
YES/ NO
s
................................................................................Changing the monitor brightness
BRIGHT/ NORMAL
BEEP
................................. Adjusting the volume of beeps when buttons are pressed
OFF (No sound) / ON
........................................Adjusting the image processing function
25
EN