Olympus FE-170/X-760 Advanced Manual page 30

5
Disconnect the USB cable from the
printer.
You can use [EASY PRINT] even when the camera is turned off or in shooting mode.
With the camera turned off or in shooting mode, connect the USB cable. The
selection screen for the USB connection is displayed. Select [EASY PRINT].
g"EASY PRINT." (P.29), "CUSTOM PRINT" step 2. (P.30)
Other print modes and print settings (CUSTOM PRINT)
1
Display the screen indicated on the right
according to procedure 1 and 2 on P.28,
and press i.
2
Select [CUSTOM PRINT], and press i.
3
Make the print settings according to the operation guide.
30
EN
Operation guide
<
EASY PRINT START
PC / CUSTOM PRINT OK
USB connector
USB
PC
EASY PRINT
CUSTOM PRINT
EXIT
SET OK