When you get an error message on the camera...
Monitor indication
q
There is a problem with
the card.
CARD ERROR
Writing to the card is
q
prohibited.
WRITE-
PROTECT
The internal memory
>
has no available
memory and cannot
MEMORY FULL
store any new data.
The card has no
q
available memory and
cannot store any new
CARD FULL
data.
There are no pictures in
L
the internal memory or
NO PICTURE
on the card.
There is a problem with
r
the selected picture and
PICTURE
it cannot be played back
ERROR
on this camera.
The battery
compartment/card cover
CARD-COVER
is open.
OPEN
g
The battery is empty.
BATTERY
EMPTY
When the camera is
used for the first time or
the battery has been
removed for a long time,
Y/M/D
the date and time are on
the factory default
setting.
Possible cause
Corrective action
This card cannot be used. Insert a
new card.
The recorded image has been
protected (read-only) on a computer.
Download the image to a computer
and cancel the read-only setting.
Erase unwanted data. Before
erasing, insert a card to back up all
data or download important pictures
to a computer.
Replace the card or erase unwanted
data. Before erasing, download
important pictures to a computer.
The internal memory or the card
contains no pictures.
Record pictures.
Use image processing software to
view the picture on a computer. If that
cannot be done, the image file is
damaged.
Close the battery compartment/card
cover.
Charge the battery.
Set the date and time.
5
57