Connecting The Camera To A Computer - Olympus FE-150/X-730 Advanced Manual

Connecting the camera to a computer

1
Make sure the camera is turned off.
• The Power/Card access lamp is off.
• The monitor is off.
• The lens is retracted.
2
Connect the multi-connector on the
camera to the USB port on the computer
using the provided USB cable.
• Refer to your computer's instruction manual to
locate the position of the USB port.
4
• The camera turns on automatically.
• The monitor turns on and the selection screen
for the USB connection is displayed.
3
Select [PC], and press A.
4
The camera is recognized by the
computer.
•
Windows
When you connect the camera to the computer
for the first time, the computer attempts to
recognize the camera. Click "OK" to exit the
message that is displayed. The camera is recognized as a "Removable
Disk".
•
Macintosh
The iPhoto program is the default application for managing digital images.
When you connect the camera for the first time, the iPhoto application
starts automatically, so close this application and start OLYMPUS Master.
Note
• The camera functions are disabled while the camera is connected to a
computer.
42
Power/Card access lamp
Monitor
Connector cover
Multi-connector
USB
PC
EASY PRINT
CUSTOM PRINT
EXIT
SET
OK