Olympus FE-120 Advanced Manual page 43

1
Press d
.
#
• The flash mode settings screen is displayed.
g"How to use the direct buttons" (P. 13)
2
Select a flash mode, and press Z.
3
Press the shutter button halfway.
• In conditions where the flash will fire, #
lights (flash stand-by).
4
Press the shutter button fully to
take the picture.
TIPS
The # (flash charge) mark blinks.
→ The flash is charging. Wait until # turns off.
Note
• The flash does not fire in the following situations:
Sequential shooting, super macro or panorama.
• The flash may not give you the optimum result in macro mode with the zoom
set to wide-angle (W). Check the resulting picture on the monitor.
Flash shooting
FLASH MODE
AUTO The flash fires automatically
in low light.
SELECT GO
OK
# mark
2816 2112 2816 2112
HQ HQ
3
5 5
43