Olympus FE-120 Advanced Manual page 113

(Playback of recorded images
Possible cause
Pictures in the internal memory cannot be played back.
A card is inserted in the
camera.
The picture is out of focus.
A subject unsuited to AF
was taken.
The camera moved
when the shutter button
was pressed.
The lens was dirty.
The picture is too bright.
The flash was set to [#]. Select a flash mode other than [#].
The center of the subject
is too dark.
The picture is too dark.
The flash was blocked
by your finger.
The subject was out of
the working range of the
flash.
The subject was too
small and was backlit.
The sequential shooting
mode was used.
Corrective action
When a card is inserted, only pictures on the
card can be played back. Remove the card.
Use the focus lock to focus on your subject.
Hold the camera correctly and press the
shutter button gently.
Camera movement occurs easily with slower
shutter speeds. When you take a picture with
[$] in a night scene or a dark situation, use
a tripod, or hold the camera firmly.
Clean the lens. Use a commercially available
blower blush and then wipe with a lens
cleaner to remove dust. Mold may form on
the lens surface if the lens is left dirty.
If the center of the subject is too dark, the
surrounding area emerges as too bright.
Adjust the exposure compensation toward
minus (–).
Hold the camera correctly, keeping your
fingers away from the flash.
Shoot within the flash working range.
Set the flash mode to [ # ] before taking the
picture.
Higher shutter speeds are used during
sequential shooting, which may result in
pictures that are darker than usual. Set [j]
in the top menu to [OFF].
Troubleshooting
Ref.
page
P. 29,
32
P. 24
P. 23
P. 116
P. 42
P. 44
P. 23
P. 42
P. 42
P. 48
113
9