Sony MZ-N505 Operating Instructions Manual page 56

Symptom
Cause/Solution
An MD is not played
l
Disc playing stopped before it came to the last track.
from the first track.
I) Press L, for 2 seconds or more to start playing.
l
Group mode is turned on.
I) Turn group mode off and play from the first track (press )t
for 2 seconds or more to start playing).
Playback sound
l
The recorder is placed where it receives continuous vibration.
skips.
I) Put the recorder on a stable place.
l
A very short track may cause sound to skip.
* Try not to create a track under one second long.
Sound has a lot of
l
Strong magnetism from a television or such device is interfering
static. with operation.
-F Move the recorder away from the source of strong
magnetism.
Cannot find the track
l
You pressed II after pressing H1 or ))I.
marks.
I) Press II before pressing HI or W.
The disc cannot edit
l
The component does not support LP2 stereo or LP4 stereo.
on other component.
I) Edit on other component that support LP2 stereo or LP4
stereo.
Momentary noise is
l
Due to the special digital audio compression technology used in
heard. LP4 stereo mode, momentary noise may occur on very rare
occasions with certain sound sources.
I) Record in normal stereo or LP2 stereo mode.
The display window
l
The recorder was disconnected from the power source.
is not normal.
+ Let the recorder sit for a while, or disconnect the power
source, reconnect it, and then press any of the operation
buttons.
56-68