Radio Operation; Switching To Radio Mode - Bosch CR24 Operating And Installation Instructions

Time | Radio operation
f Press the MENU 7 button to open the
menu.
f Press the MENU 7 button repeatedly
until "ALARM" appears on the display,
along with the current setting, "ON" or
"OFF".
f Turn the volume control 1 to the left or
right in order to switch the alarm on or off.
If "ALARM ON" is selected, the menu for setting
the time will be displayed after about 2
seconds.
f Enter the alarm time as described in the
"Setting the time" section.
f Press the MENU 7 button, repeatedly if
necessary, to close the menu.
Robert Bosch Car Multimedia GmbH
02_CR24_en.indd 45

Radio operation

This device is equipped with an RDS radio
receiver. Many of the receivable FM stations
broadcast a signal that not only carries the
program but also additional information such
as the station name and program type (PTY).
The station name appears in the display as
soon as the tuner receives it.

Switching to radio mode

If you are in a different operating mode,
f Press the BND 2 button,
or
f Press the SRC > button repeatedly until
"RADIO" appears on the display.
The display shows the current frequency or the
station name.
RDS convenience functions (AF,
REG)
The RDS convenience functions AF (Alternative
Frequency) and REG (Regional) expand the
range of performance of your radio device:
AF: If the RDS convenience function is
f
activated, the device automatically
searches in the background for the best
receivable frequency of the set station.
REG: At certain times, some radio stations
f
divide their program into regional
programs providing different content. The
activated REG function prevents the
device from switching to alternative
frequencies of the adjusted station that
are transmitting a different program
content.
7 620 210 016 | 11.2013
en | 45
20.11.13 16:54