Radio Operation - Bosch CAD 12 Operating And Installation Instructions

46 | en
Adjusting the display brightness
f Press the MENU G button to open the
menu.
f Press the MENU G button repeatedly
until "DIMTN" appears on the display along
with the current setting.
f Turn the volume control B to the left or
right in order to set the display brightness
to between +5 and -5.
In order to leave the menu,
f press the MENU G button, repeatedly if
necessary.
7 620 210 015/020-022 | 05.2015
Tone and display | Radio operation

Radio operation

This device is equipped with an RDS radio
receiver. Many of the receivable FM stations
broadcast a signal that carries not only the
program, but also additional information such
as the station name and program type (PTY).
The station name appears in the display as
soon as the tuner receives it.
Switching to radio mode
If you are in a different operating mode,
f press the BND N button
or
f press the SRC C button repeatedly until
"RADIO" appears on the display.
The display shows the current frequency or the
station name.
RDS convenience functions (AF,
REG)
The RDS convenience functions AF (Alternative
Frequency) and REG (Regional) expand the
range of performance of your radio device:
f AF: If the RDS convenience function is
activated, the device automatically
searches in the background for the best
receivable frequency of the set station.
REG: At certain times, some radio stations
f
divide their program into regional
programs providing different content. The
activated REG function prevents the
device from switching to alternative
frequencies of the adjusted station that
are transmitting a different program
content.
Robert Bosch Car Multimedia GmbH