LG 50PK950 Training Manual page 98

Connector P102 to SMPS P811 Voltages and Diode Checks
Connector P102 to SMPS P811 Voltages and Diode Checks
Voltage and Diode Mode Measurements
P102 Connector "Z-SUS" to "SMPS" P811
Pin Label
1-2 VS
3 n/c
4-5 Gnd
6-7 n/c
8 Gnd
9-10 n/c
* Note: This voltage will vary in accordance with Panel Label
There are no Stand-By voltages on this connector
Diode Mode Readings taken with all connectors Disconnected. DVM in Diode Mode.
Run Diode Mode
*202V Open
n/c n/c
Gnd Gnd
*60V n/c
Gnd Gnd
5V n/c
P102 Location: Top Left
98 October 2010
Pin 1
50PK950 Plasma