LG 50PK950 Training Manual page 126

Left X Drive P121 Connector from Y
Left X Drive P121 Connector from Y
Voltage and Diode Mode Measurement (No Stand-By Voltages)
P121 Connector " X-Drive Left Board" from "Y-SUS" P114
Pin Label
1-4 VA
5 n/c
6-7 Gnd
* Note: This voltage will vary in accordance with Panel Label.
There are no Stand-By voltages on this connector.
Diode Mode Readings taken with all connectors Disconnected. Black lead on Gnd. DVM in Diode Mode.
- SUS P114 Information
- SUS P114 Information
Run Diode Mode
*60V Open
n/c n/c
Gnd Gnd
126 October 2010
With Heat Sink
1
50PK950 Plasma