LG 50PK950 Training Manual page 90

Incorrectly Seated Y - Drive Flexible Ribbon Cables
Incorrectly Seated Y - Drive Flexible Ribbon Cables
The Ribbon Cable is clearly improperly seated
into the connector. You can tell by observing the
line of the connector compared to the FPC, they
should be parallel.
The Locking Tab will offer a greater resistance to
closing in the case.
Note the cable is crooked in this case because
the Tab on the Ribbon cable was improperly
seated at the top. This can cause bars, lines,
intermittent lines abnormalities in the picture.
Remove the ribbon cable and re-seat it correctly.
90 October 2010 50PK950 Plasma