LG 50PK950 Training Manual page 37

Left and Right X Drive Connector Removal
Left and Right X Drive Connector Removal
See below to Remove the Connections on the X-Boards.
From the Control Board to the X-Boards.
There may be tape on these connectors.
P110
P210
P310
Are all the
same
Remove tape (if present) and Gently pry the
locking mechanism upward and remove the ribbon
cable from the connector.
Removing Connectors to the TCPs.
Gently lift the locking mechanism
upward on all TCP connectors
Left X: P101~108
Center X: P201~207
Right X: P301~308
Example
TCP
Cushion (Chocolate)
37
Disconnect connector P121
Va from
the
Y-SUS to
Left X
Only
Disconnect Va from Left to Center to
Center to Right X Boards
P120 to P220
Left to Center X
P221 to P320
Center to Right X
Carefully lift the TCP ribbon up and off.
It may stick, be careful not to crack TCP.
(See next page for precautions)
Flexible ribbon cable connector
October 2010
Example
Example
Example
50PK950 Plasma