SETUP
The Setup menu includes System Settings, Picture Setup, and Streaming Settings.
Note
SYSTEM SETTING
Camera Name
Host Name – The Host Name is used to identify
the camera on your system. If camera based
Motion Detection is enabled and is set to send
alarm message by Mail/FTP, the host name
entered here will display in the alarm message.
Time Zone – Select your time zone.
Time Format – Select your desired time format.
Sync With Computer Time – Select to
synchronize the camera date and time with the
connected recorder.
Sync with NTP Server – Manual allows you to
define the date and time manually. Network
Time Protocol (NTP) is an alternate way to
synchronize your camera's clock with a NTP
server. Specify the server you wish to
synchronize in the NTP Server box. Then select
an Update Interval. For more information about
NTP, visit www.ntp.org.
26
The Setup menu displays limited setup options. For a complete list of setup
options, see the Advanced section.