Further details regarding the individual steps
Installing the burner
4x
A
G
E
1. Fit burner and tighten 4 screws A
diagonally.
!
Please note
Tighten screws just enough
to ensure the components do
not suffer damage and will
function correctly.
2. Insert new gasket and tighten the fit-
ting on gas supply pipe B.
3. Attach venturi extension C to the
fan.
D
Commissioning, inspection, maintenance
(cont.)
F
C
B
4. Fit the power cables for fan motor
D, gas train E, ignition unit F and
electrodes G.
5. Reopen gas supply and switch on
power supply.
41